Locust Street Addition

Philadelphia, PA United States

 

Project Description

2011 RADA

Light Commercial / Grand

The judges were so smitten with the skillful insertion of this small commercial addition that they gave it one of the few Grand awards this year. “I think the idea that you [could] build a sliver of a building and make it work is cool,” one judge said.

A “sliver” is an appropriate description, for the architects had only a 9½-foot site between the existing building and a community garden. On this space, the client had plans for a less ambitious one-level atrium adjoining an existing cafe, “but then it evolved into a three-story project,” says architect Kevin C. Rasmussen, AIA, LEED AP.

Rasmussen and his partner, Vivian M. Su, LEED AP, resolved the problem by designing a simple volume with an open seating area on the ground floor, and they added two more levels above that expand studio apartments into one-bedroom units.

The addition cuts a very modern figure in its historic district neighborhood, but it fits in because of its scale and use of materials. “Getting approval is a big part of the backstory,” Rasmussen recalls, adding that it was “the most complicated part of the project.”

To satisfy the neighborhood association and the Philadelphia Historical Commission, the duo used laser-cut Cor-Ten steel on the façade and specified a silver-black brick for the side and rear elevations. “The idea was that the materials would relate to each other and to the old building but still differentiate themselves,” Rasmussen explains.

“Great,” one judge called the result. “It feels like you slid this thing out, like a drawer.”

 

Project Details

Locust Street Addition
Location:
Shared by:
 
Project Team:
    Kevin C. Rasmussen, Vivian M. Su, Principals In Charge / Project Architects
Consultants:
  • General Contractor: John Hanson and Chris Hanson 
  • Steel Fabricator: Bill Curran 
  • Developer: Gibbs Connors 
  • Photography: Jeffrey Totaro 
 
Project Scope:
Project Type:
Room Or Space:
Project Status:
Project Size:
    900 sq ft
Construction Cost:
    $225,000
 
 

Specified Products

Doors and Windows: Jeld-Wen, www.jeld-wen.com; Flooring (Wood): Teragren, www.teragren.com; Hardware: Dorma, www.dorma-usa.com, Ives, www.iveshardware.com, Sargent Lock, www.sargentlock.com; Hvac Equipment: Sanyo, www.sanyohvac.com; Lighting Fixtures: WAC, www.waclighting.com; Paints/Stains/Wall Finishes: Benjamin Moore, www.benjaminmoore.com; Roofing: GAF, www.gaf.com

 
 

Comments

Please read our Content Guidelines before posting.

Other Light Commercial Projects

 

Other Mid-Atlantic Projects